How To Hang Wall Art Properly To Save Your Walls

  • Post comments:0 Comments
  • Reading time:7 mins read
You are currently viewing How To Hang Wall Art Properly To Save Your Walls

Art is a good investment. It can add value to your home. It can bring a smile to your face. Plus, it’s the 21st century: you’re supposed to have art on your walls. That said, hanging art is hard, and you’re bound to screw it up at least once. If you don’t want to wind up with holes in your walls or pieces of art randomly hanging off of them, here’s how to hang wall art properly.

Treat the wall as a blank canvas. When choosing where on the wall you want your art piece, envision it as if it were the only thing on that surface. You may not be able to see a frame around the image, but still know what the edges are. Imagine yourself standing a few feet away from the painting and take note of how much space there is between the top, bottom and sides of the image.

Hang in harmony with other pieces of art in your room. If you decide that one painting isn’t enough, imagine how you would group different images together to make one larger picture on your wall. The size and shape of each piece should compliment each other so that they work together as one piece rather than separate pictures tacked onto the same wall.

* When you hang art on your walls, how do you avoid damaging the walls?

Hanging wall art is as important as the art itself. This is because improper installation of the art will damage your walls. You can avoid this by following some basic rules.

Hanging Wall Art and Decorations is a big part of decorating your home. Whether you are doing it yourself or hiring a professional, there are many ways to hang wall art without damaging your walls.

Taping Wall Decor with Double-Sided Tape:

The easiest way to hang wall art is with double-sided tape. The only caution here is that it may damage the paint on your walls or the trim if you aren’t careful. This method is good for items under 15 pounds in weight. The first thing you want to do is figure out where you want to place your art and remove the tape backing from one side of the tape. Press the sticky side of the tape firmly against your wall in the right spot and hold for several seconds until it sticks. Then carefully place your item onto the sticky side of the tape and hold for a few more seconds until it sticks well. Be very careful not to allow any part of your item to touch the sticky side of the tape as it will stick directly to them. Remove the rest of the backing from the tape and press down firmly all over your item until it sticks well to both sides of the tape. This method works best with medium weight items up to about 12 inches in size.*

Using Mount

How to hang wall art properly can be a daunting task for any homeowner. The selection of the piece itself, the mounting materials and hardware, and finally getting it on the wall without damaging the item or your walls is not as easy as one might think.

Trying to decide if you should use nails, screws, or hooks? Fear not!

Let’s take a look at some of the different types of mounting options available to you in order to help you decide which is best for your new artwork.

There are three main types of hanging hardware:

Nails – Used primarily for lightweight pieces such as photographs and light posters. Nails can be used with almost any surface material, but are usually best suited for surfaces such as wood or particle board. When using nails as a hanging method, it is important to remember that nail holes can always be filled, but once made cannot be taken back out. They are also not easily replaceable when trying to switch out your art. If you choose this method, avoid using nails in high traffic areas as they may eventually loosen over time and will need to be replaced.

Screws – Similar to nails in that they are often used for lightweight pieces, but there are some key differences that should be noted when deciding which

When it comes to hanging art on your walls, you must take into consideration the most important thing: how it will affect your wall. The first thing that you need to consider is the quality of the art that you are going to put up. It should be something that will draw attention in a positive way and not something that will ruin the entire look of your room.

Artwork tends to be quite costly, especially if it is original pieces and not prints. You do not want to invest in some beautiful piece of art only to have it ruined due to improper hanging. There are certain things that you need to keep in mind when it comes to hanging art work on your walls so that you do not ruin it and so that the overall appearance of the room looks great.

The thing that you must understand is that there are different types of art work, each with its own set of requirements when it comes to hanging them on the walls. You cannot hang oil paintings or acrylic paintings just anywhere; they require special attention and care. The same applies with large art works such as sculpture or murals. You also need to consider if putting nails or screws into the walls might damage them in any way since these kinds of pieces tend to use this method for hanging.

It is important to know how to hang art properly, especially if you have expensive art, or if you want your art to last for a long time. When it comes to hanging art, there are many schools of thought on how best to do so. Many people avoid hanging art at all because it can be a hassle trying to figure out what the right way is.

Layout and hanging your artwork will create a lasting impression with visitors and potential buyers of your home.

If you are planning on hanging art in your home you need to determine the following:

1) Weight of the piece. Most frames are made of wood or metal. The weight of the frame should be less than the weight capacity of your wall (usually 100 pounds).      2) Length of nails or screws. The length of nails or screws that you will use will depend upon where exactly you hang your art piece, which we will discuss later.        3) Wall material. If you are unsure about what kind of wall material you have, test by nailing a small piece of wood into the wall with several nails; if this leaves indentations in the wall then use shorter nails, if not then go ahead and use longer nails or screws. You should also make sure that your nails or

Or you could get a thread that is much longer than the width of your fabric or wallpaper and make sure the center of it runs from the top of your wall to the bottom.

To do this, start by measuring how long the top panel on your wall is. Then measure how long each side panel is going to be (based on how many panels you want at the bottom). Then add a few inches to each measurement to make sure you have enough room for your rod.

Then take your measurements and go to your local hardware store and find a rod that will fit them. (You can also order one online.) Most hardware stores will cut the rod down to size for you, too.

Once you have your rod, use mounting tape to attach it to the wall where you want it. Then get the fabric or wallpaper and center it on the wall so that one side of the “V” is touching that mounting tape. Then bring up one side of your fabric or wallpaper and secure it in place with mounting tape as well. Then take your second piece of fabric/wallpaper and do the same thing with it, but make sure both sides are secure with mounting tape before moving onto the next step.

You may need two people for this part. Have one

Leave a Reply