I have a little confession to make. We have a collection of fine art prints and paintings that we love. I’ve been trying to figure out the best way to display them for quite some time now.
Canvas, wood frames, printouts from my computer – you name it. Nothing seemed to fit or look quite right. My walls were bare and I had nowhere to hang my art without damaging the wall with nails or pushing into the ceiling with large pieces of wood.
I tried using command hooks but the pieces had too much weight for the small hooks to hold, and they ended up tearing through the prints and leaving holes in my walls.
Then I found Ties That Bind (and thank goodness I did). They send you a kit with everything you need to hang art on your walls safely and easily – as many times as you want! No more holes, no more worries!
Here are 7 tips for hanging art correctly and safely:
1) Use the right tools
Ties That Bind comes with two metal pieces that are a bit like a cable tie, though they’re flat instead of round. They’re called Hooks-that-Hang because they’re hooked onto the wall and then used to hang something from them (like artwork). You
Hanging art on the wall can be hard. The walls may not be level, or they may have been built on a tilt.
The space beside your artwork is often taken up with plugs and electrical outlets, making it impossible to center a piece of art on the wall.
And then there’s the matter of how to make your framed art look balanced, centered, and right-sized.
Artwork is an investment, and you want to take care of it well. Here are some tips for hanging your framed artwork properly and safely:
1: Use a level when hanging art…
People believe that it is a bit of an art to be able to hang art on the wall with no problem whatsoever. The truth is, if you follow the right steps and know some simple tricks, hanging your pre-framed art will not be a problem at all.
Here are seven tips for hanging art that is pre-framed:
Art can become an important part of your home’s decor. If you’re considering hanging art in your home, it is important to choose a wall that will hold the weight of the art and be strong enough to do so safely.
Locating and Hanging Your Art
When it comes time to hang this beautiful piece of art on your wall, a few things should be kept in mind. First of all, you need to make sure that the wall is sturdy enough to support it. Secondly, the frame should be hung so as to avoid putting pressure on the back of the artwork. Finally, make sure that you are using appropriate hardware for the job. The following tips will help ensure that you are hanging your artwork correctly and securely.
1. Make Sure That You Are Using Appropriate Hardware
When you buy pre-framed artwork, it should come with a wire on the back for hanging purposes. If you are resourceful enough to have found some artwork without one, then you can purchase wire at most local hardware stores or online through sites such as Amazon or eBay. It is best if you can find an invisible wire, but if this isn’t possible, then just make sure that the wire blends in with either the color of your wall or the color of your
Hanging your art on the wall is a great way to add some personality to your home. And it’s a relatively easy task, too. But not all art is created equal, and it’s important to hang your work of art correctly.
The first step in hanging art correctly is determining what type of art you’ve purchased. This can be done by looking at the back of the frame. If there are two nails holding up the frame, you have a canvas that has been stretched onto a wooden frame and requires using special hooks on the wall in order to hang it up. If there are two holes in the back of the frame and no nails, you have a ready-to-hang piece of art (or photo) that has been mounted onto a wooden frame.
If you’re working with a ready-to-hang piece of art or photo, then the process is going to be much simpler than if you’re working with a piece of canvas that will require stretching.
Hanging art on the wall is one of the best ways to increase the value of your home. Not only does it add color and character to a room, but it also makes a big impact on how much your home will sell for.
Trying to hang your art work in a way that enhances your space can sometimes be more difficult than you think. There are several instances where people have ruined their walls, artwork and homes with bad art hanging jobs. The most common mistakes involve not having the proper materials, not measuring correctly and not using appropriate hardware. Here are some tips for making sure that you do it right.
Before You Hang Your Art Work Before you decide to hang anything on your walls, there are a few things that you should consider. Measure out where exactly you want it to be hung, so that you have enough room in case the piece is larger than you expected. Also, make sure that the piece will be hung up in an area where it will be protected from moisture and humidity. For example, if there are windows or vents nearby then you don’t want them directly behind your canvas where they could cause mildew or water damage over time.
Once You Have Your Materials Gathered Once you have measured out where you will be hanging your art work
Hanging your art on the wall is a little tricky. There are a lot of variables that can get in the way and make it difficult to get it hung correctly, like how heavy the piece is, how thick the frame is, how far out the frame overhangs, etc.